Skip to content Skip to footer

Excellent · 5.0 on Google

Hardwood Floor Refinishing in Bellevue, WA

Hardwood floor refinishing in Bellevue can make a 30-year-old oak floor look new again, often for far less than replacing it. Jeff Bueler, a licensed journeyman carpenter, checks how much sandable wood you have left, repairs damaged boards and refinishes the floor in the color and sheen you choose.

Licensed, Bonded & Insured

15+ Years Experience

1-Year Workmanship Warranty

What we refinish

Bring Your Bellevue Hardwood Floors Back to Life

Most floors we refinish in Bellevue aren’t worn out. The finish is. Gray traffic lanes, pet scratches, sun-faded spots near big windows and orange-toned oak from the ’80s and ’90s all sit in the top layer, and sanding takes that layer off. Underneath is usually solid wood with decades of life left.

Before we quote, we check what you actually have: solid or engineered, how many times it’s been sanded, and whether any boards need replacing. Then we talk through stain color and finish options, including clear water-based finishes and harder-wearing Swedish finishes, so you know exactly what you’re getting.

Refinished hardwood floor in living room of Bellevue, WA home

Full Sand & Refinish

We sand down to clean wood, taking out scratches, gray traffic lanes and the old finish, then apply new protective coats. It’s the right fix when wear has gone through the finish.

Stain Color Changes

Orange-toned oak can go natural, neutral or darker once it’s sanded. We put sample patches on your actual floor so you pick the color in your own light.

Board Repair & Patching

Pet stains, water damage and cracked boards get cut out and replaced with matching wood before sanding, so the repair disappears under the new finish.

Stairs & Landings

Treads, risers and nosings are refinished to match the floor, or repaired and replaced where they’re worn out. That’s carpentry, and Jeff is a licensed journeyman carpenter.

Testimonials

What Our Refinishing Customers Say

★★★★★Google

“Jeff is excellent at what he does! He rebuild my wood stairs to match the rest of the hardwood in my house. They came out exactly the same color as the rest of the wood! He’s an extremely talented carpenter and can do pretty much anything with wood down to the fine details! I would highly recommend him! And he’s reasonably priced! Thank you Jeff for doing such an amazing job!”

Kevin MillerStairs
★★★★★Google

“We hired Jeff, at Four Point Flooring. He was there when he said he would be and finished when he said too. He is very knowledgeable about all the different woods & how to properly care for them. The results were beautifully refinished white oak floors. It was the first time they had been refinished in 34 years. It was a stressless transaction, fair price & excellent results. We highly recommend Jeff.”

Pam ReevesRefinish
★★★★★Google

“Exceptional experience using Jeff/4point flooring to do a small repair and then restore of our 25+ year old wood floors t/o our home. He was always on time, respectful of our home and privacy and showed up with a smile and a laugh daily. Jeff did exactly what he said he would do for what we felt was a very fair price. Would use again and highly recommend”

Karyol Page KuchanRepair & Refinish
★★★★★Google

“We hired Four Point Flooring for a hardwood floor installation in our Redmond home and had an excellent experience. Jeff was great to work with from start to finish, very knowledgeable, responsive, and easy to work with. They helped us select the right hardwood for our home, and the finished floors look fantastic. The project stayed on schedule and everything was left clean and polished. I would highly recommend Jeff and Four Point Flooring to anyone looking for quality hardwood installation.”

Taylor HeckInstall · Redmond
★★★★★Google

“I had a great experience working with Four Point Flooring. Jeff and the team handled my wood floor installation project in Bellevue with incredible attention to detail, and the final result looks flawless. Communication was excellent from start to finish. They kept me updated at every step, answered all my questions quickly, and made the whole process easy and stress free. If you're looking for high quality flooring services and a company that truly cares about customer experience, i highly recommend Four Point Flooring.”

Cameron KilstromInstall · Bellevue
★★★★★Google

“Four Point Flooring handled our hardwood installation at our home in Bellevue and the results exceeded expectations. Jeff and the team were organized, detail focused, and the new floors look flawless. Thank you!”

Ava IzdepskiInstall · Bellevue

How it works

Our Hardwood Refinishing Process

A good refinish is mostly preparation and patience. Here’s how a typical Bellevue refinishing job runs, from the first look at your floor to the day the furniture goes back. Jeff is your contact the whole way.

  1. 1

    Inspect & Test

    We check the species, how much sandable wood is left, any water or pet damage, and what finish is on the floor now. That tells us whether a full sanding is needed and what it will take.

  2. 2

    Prep & Protect

    Rooms get cleared, doorways and vents get sealed off, and cabinets, baseboards and nearby rooms get protected before any sanding starts.

  3. 3

    Sand, Repair & Stain

    We sand in stages from coarse to fine, hand-work the edges and corners, replace damaged boards, and lay out stain samples for you to approve.

  4. 4

    Finish & Walkthrough

    We apply the finish coats you chose, water-based or Swedish, then walk the floor with you and give you clear dates for foot traffic, rugs and furniture.

Man using tool to sand hardwood floor

About the owner

You Work Directly With the Owner

Jeff Bueler grew up on Whidbey Island, the fourth generation of contractors in his family. He’s also a licensed journeyman carpenter, which matters more on a flooring job than most people expect. Subfloor repair, stair work and trim are all carpentry.

Four Point Flooring is based in Bellevue and refinishes floors throughout Bellevue. Because Jeff also installs hardwood, he knows how floors are built, which helps when you’re deciding whether to refinish, repair or replace.

4th Generation Contractor

15+ Years Experience

Locally Owned & Operated

Licensed, Bonded & Insured

Projects

Recent Refinishing Projects

Local to Bellevue

Hardwood Refinishing Across Bellevue’s Neighborhoods

Bellevue’s older neighborhoods are full of hardwood worth saving. Many ramblers and split-levels in Lake Hills, Newport Hills, Woodridge and Eastgate have original oak strip floors, sometimes still hidden under carpet. Homes in Somerset and Bridle Trails often have newer, wider plank floors that need a gentler sanding plan. Condos and townhomes in Downtown Bellevue and Wilburton come with building rules about work hours, noise and elevator use, and we plan the job around them.

We also refinish in Crossroads, Factoria and West Bellevue. Wherever you are, the first visit is the same: we look at the wood, measure, and tell you honestly whether refinishing is the right call.

Get in Touch

Address

1130 140th Ave NE Ste. 300
Bellevue, WA 98005

Phone

360-929-2933

Email

jeff@fourpointflooring.com

License

Contractor License: FOURPPF763Q5 · Verify at L&I

Warranty

1-year workmanship warranty

Get a Quote

Frequently asked questions

Bellevue Hardwood Refinishing FAQs

It depends on square footage, the condition of the wood, whether you’re changing the stain color, how many boards need repair, and the finish you choose. Stairs are priced separately. We give a free written estimate after seeing the floor.

Usually, yes. Most buildings have rules on work hours, noise and elevator reservations, and some require notice to neighbors. Send us your building’s rules and we’ll plan the sanding days around them.

If the boards are solid and there’s enough wood above the tongue to sand, refinishing almost always costs less and keeps the original floor. Replacement makes sense when boards are badly water-damaged, too thin to sand again, or the floor has structural problems. We’ll tell you which one you have.

Yes. Once the old finish is sanded off, oak can go natural, lighter-looking, gray-toned or dark. We put samples on your actual floor so you can see them in your own light before committing.

Water-based finishes stay clear, have low odor and let you back in sooner. Swedish finishes are very hard-wearing and give a rich, slightly amber look, but they have strong fumes, and you’ll need to stay out of the house while they cure. We’ll help you weigh durability against downtime.

Four Point Flooring is licensed, bonded and insured in Washington (contractor license FOURPPF763Q5).

Service area

Hardwood Refinishing Near Bellevue

Based in Bellevue, we refinish hardwood floors in Bellevue and across the Eastside and Snohomish County for homeowners, landlords, builders and general contractors. Not on the list? Call and ask.

Floor too far gone to refinish? See hardwood floor installation in Bellevue.

Contact UsFree Estimates for Your Refinishing Project

Licensed hardwood refinisher serving Bellevue, 15+ years on Northwest homes and 5-star Google reviews. Tell us about your floors and we’ll set up a free on-site estimate.

Get a Quote!