Skip to content Skip to footer

Excellent · 5.0 on Google

Hardwood Floor Refinishing in Mill Creek, WA

Hardwood floor refinishing in Mill Creek usually means taking a 25- or 30-year-old oak floor from dated to current. Jeff Bueler, a licensed journeyman carpenter, sands off the old yellowed finish, repairs worn boards and refinishes in the color you want today.

Licensed, Bonded & Insured

15+ Years Experience

1-Year Workmanship Warranty

What we refinish

Updating Mill Creek Hardwood Floors With Refinishing

Many Mill Creek homes built in the ’80s and ’90s came with red or white oak in the entry, kitchen and dining room, finished in the golden tones that were popular then. The wood is usually in good shape. What dates it is the color and the worn finish.

Refinishing lets you change both. After sanding, oak can be left natural, toned down or stained darker, and we put samples on your floor so you can compare them with your cabinets and trim. It’s one of the most cost-effective updates you can make before selling or after moving in.

Refinished hardwood floor in living room of Bellevue, WA home

Stairs & Landings

Worn treads and chipped nosings are refinished to match the floor, or rebuilt when they’re too far gone. Jeff’s carpentry license covers the work.

Full Sand & Refinish

When the finish has worn through and the wood itself is scratched or graying, a full sanding takes the floor back to fresh wood. New finish coats go on after that.

Stain Color Changes

Want lighter, darker or less orange? After sanding, we test stain samples right on your floor, so you see the real color before the whole floor gets done.

Board Repair & Patching

Black pet stains, water-swollen boards and splits near doorways get cut out and laced in with matching wood, then sanded flush with the rest of the floor.

Testimonials

Reviews From Local Homeowners

★★★★★Google

“We hired Jeff, at Four Point Flooring. He was there when he said he would be and finished when he said too. He is very knowledgeable about all the different woods & how to properly care for them. The results were beautifully refinished white oak floors. It was the first time they had been refinished in 34 years. It was a stressless transaction, fair price & excellent results. We highly recommend Jeff.”

Pam ReevesRefinish
★★★★★Google

“Exceptional experience using Jeff/4point flooring to do a small repair and then restore of our 25+ year old wood floors t/o our home. He was always on time, respectful of our home and privacy and showed up with a smile and a laugh daily. Jeff did exactly what he said he would do for what we felt was a very fair price. Would use again and highly recommend”

Karyol Page KuchanRepair & Refinish
★★★★★Google

“Jeff is excellent at what he does! He rebuild my wood stairs to match the rest of the hardwood in my house. They came out exactly the same color as the rest of the wood! He’s an extremely talented carpenter and can do pretty much anything with wood down to the fine details! I would highly recommend him! And he’s reasonably priced! Thank you Jeff for doing such an amazing job!”

Kevin MillerStairs
★★★★★Google

“We hired Four Point Flooring for a hardwood floor installation in our Redmond home and had an excellent experience. Jeff was great to work with from start to finish, very knowledgeable, responsive, and easy to work with. They helped us select the right hardwood for our home, and the finished floors look fantastic. The project stayed on schedule and everything was left clean and polished. I would highly recommend Jeff and Four Point Flooring to anyone looking for quality hardwood installation.”

Taylor HeckInstall · Redmond
★★★★★Google

“I had a great experience working with Four Point Flooring. Jeff and the team handled my wood floor installation project in Bellevue with incredible attention to detail, and the final result looks flawless. Communication was excellent from start to finish. They kept me updated at every step, answered all my questions quickly, and made the whole process easy and stress free. If you're looking for high quality flooring services and a company that truly cares about customer experience, i highly recommend Four Point Flooring.”

Cameron KilstromInstall · Bellevue
★★★★★Google

“Four Point Flooring handled our hardwood installation at our home in Bellevue and the results exceeded expectations. Jeff and the team were organized, detail focused, and the new floors look flawless. Thank you!”

Ava IzdepskiInstall · Bellevue

How it works

Our Hardwood Refinishing Process

A good refinish is mostly preparation and patience. Here’s how a typical Mill Creek refinishing job runs, from the first look at your floor to the day the furniture goes back. Jeff is your contact the whole way.

  1. 1

    Assess the Floor

    Species, remaining wood thickness, damage and the existing finish all get checked on the first visit, so the quote matches what your floor actually needs.

  2. 2

    Protect the House

    We move what needs moving, seal doorways and vents with plastic, and cover cabinets and trim so the rest of your home stays clean.

  3. 3

    Sand, Fix & Sample

    The floor is sanded in passes from coarse to fine grit, edges are done by hand, damaged boards are replaced, and stain samples go down for you to choose.

  4. 4

    Coat & Hand Back

    Finish coats go on in the system you picked. Then we walk the floor together and give you a timeline for walking, rugs and furniture.

Man using tool to sand hardwood floor

About the owner

You Work Directly With the Owner

Jeff Bueler grew up on Whidbey Island, the fourth generation of contractors in his family. He’s also a licensed journeyman carpenter, which matters more on a flooring job than most people expect. Subfloor repair, stair work and trim are all carpentry.

Four Point Flooring is based in Bellevue and refinishes floors throughout Mill Creek. Because Jeff also installs hardwood, he knows how floors are built, which helps when you’re deciding whether to refinish, repair or replace.

4th Generation Contractor

15+ Years Experience

Locally Owned & Operated

Licensed, Bonded & Insured

Projects

Recent Refinishing Projects

Local to Mill Creek

Hardwood Refinishing Throughout Mill Creek

We refinish floors in the original neighborhoods around the golf course and Mill Creek Country Club, in Mill Creek East, near Thomas Lake, and in the townhomes around Mill Creek Town Center. Because many homes were built in the same era, we often see the same patterns: worn kitchens, faded entries and oak that has never been refinished.

We also work in nearby Silver Firs and Bothell. If you’re in a townhome or condo, we’ll plan around HOA rules on noise and work hours.

Get in Touch

Address

1130 140th Ave NE Ste. 300
Bellevue, WA 98005

Phone

360-929-2933

Email

jeff@fourpointflooring.com

License

Contractor License: FOURPPF763Q5 · Verify at L&I

Warranty

1-year workmanship warranty

Get a Quote

Frequently asked questions

Mill Creek Hardwood Refinishing FAQs

Often, yes. Refreshed hardwood photographs well and is one of the features buyers notice first. Refinishing usually costs far less than new flooring. We can talk through what will make the biggest difference.

Sanding removes the old finish, which is where most of the yellowing is. Red oak has natural pink-orange tones, so we use stain samples to show you how neutral it can realistically get.

Yes, but blending new finish into old in the middle of a room is hard to hide. We usually stop at a natural break like a doorway or threshold. We’ll show you where.

It depends on square footage, condition, color change, repairs and the finish system. The estimate is free and done on site.

Most jobs take a few days of work plus cure time. With a water-based finish, light foot traffic is usually possible within about a day. We’ll give you a schedule with the estimate.

Four Point Flooring is licensed, bonded and insured in Washington (contractor license FOURPPF763Q5).

Service area

Hardwood Refinishing Near Mill Creek

Based in Bellevue, we refinish hardwood floors in Mill Creek and across the Eastside and Snohomish County for homeowners, landlords, builders and general contractors. Not on the list? Call and ask.

Floor too far gone to refinish? See hardwood floor installation in Mill Creek.

Contact UsFree Estimates for Your Refinishing Project

Licensed hardwood refinisher serving Mill Creek, 15+ years on Northwest homes and 5-star Google reviews. Tell us about your floors and we’ll set up a free on-site estimate.

Get a Quote!