“Exceptional experience using Jeff/4point flooring to do a small repair and then restore of our 25+ year old wood floors t/o our home. He was always on time, respectful of our home and privacy and showed up with a smile and a laugh daily. Jeff did exactly what he said he would do for what we felt was a very fair price. Would use again and highly recommend”
★★★★★ Excellent · 5.0 on Google
Hardwood Floor Refinishing in Snohomish, WA
Hardwood floor refinishing in Snohomish often means bringing back original fir or oak that’s been hidden for decades. Jeff Bueler, a licensed journeyman carpenter, carefully sands old floors, patches boards with matching wood and refinishes them so they keep their character.
Licensed, Bonded & Insured
15+ Years Experience
1-Year Workmanship Warranty
What we refinish
Restoring Original Hardwood in Snohomish Homes
Snohomish has some of the oldest homes in the county, and many still have their original floors. Old-growth Douglas fir and early oak are worth saving: they have tight grain and a color you can’t buy new. They also need care. Fir is softer than oak, older floors may have been sanded thin, and generations of nails, patches and repairs need attention.
We sand old floors conservatively, set or pull exposed nails, patch missing boards with salvaged or matching wood and choose a finish that suits the age of the house.
Full Sand & Refinish
Sanding removes the scratched, dulled top layer and the old finish in one go. Then the floor gets fresh protective coats in the sheen you choose.
Stain Color Changes
Sanded oak can take almost any look, from natural to deep brown. You approve stain samples on your own floor before we commit.
Board Repair & Patching
Damaged boards are replaced before sanding, not after, so the new wood is sanded and finished with the rest and blends in.
Stairs & Landings
Stairs show wear first. We refinish treads, risers and landings to match the floors, and repair or replace damaged parts.
Testimonials
What Homeowners Say About Jeff
“Jeff is excellent at what he does! He rebuild my wood stairs to match the rest of the hardwood in my house. They came out exactly the same color as the rest of the wood! He’s an extremely talented carpenter and can do pretty much anything with wood down to the fine details! I would highly recommend him! And he’s reasonably priced! Thank you Jeff for doing such an amazing job!”
“We hired Jeff, at Four Point Flooring. He was there when he said he would be and finished when he said too. He is very knowledgeable about all the different woods & how to properly care for them. The results were beautifully refinished white oak floors. It was the first time they had been refinished in 34 years. It was a stressless transaction, fair price & excellent results. We highly recommend Jeff.”
“We hired Four Point Flooring for a hardwood floor installation in our Redmond home and had an excellent experience. Jeff was great to work with from start to finish, very knowledgeable, responsive, and easy to work with. They helped us select the right hardwood for our home, and the finished floors look fantastic. The project stayed on schedule and everything was left clean and polished. I would highly recommend Jeff and Four Point Flooring to anyone looking for quality hardwood installation.”
“I had a great experience working with Four Point Flooring. Jeff and the team handled my wood floor installation project in Bellevue with incredible attention to detail, and the final result looks flawless. Communication was excellent from start to finish. They kept me updated at every step, answered all my questions quickly, and made the whole process easy and stress free. If you're looking for high quality flooring services and a company that truly cares about customer experience, i highly recommend Four Point Flooring.”
“Four Point Flooring handled our hardwood installation at our home in Bellevue and the results exceeded expectations. Jeff and the team were organized, detail focused, and the new floors look flawless. Thank you!”
How it works
Our Hardwood Refinishing Process
A good refinish is mostly preparation and patience. Here’s how a typical Snohomish refinishing job runs, from the first look at your floor to the day the furniture goes back. Jeff is your contact the whole way.
- 1
First Look
We look at the species, measure how much wood is left to sand, note any damage and identify the current finish before we price anything.
- 2
Get the Rooms Ready
Furniture comes out, openings are sealed off, and cabinets, baseboards and adjoining rooms are protected.
- 3
Sanding & Repairs
We sand in stages, hand-finish the edges and corners, cut in new boards where needed and set out stain samples for your approval.
- 4
Final Coats
The finish goes on in multiple coats. We do a final walkthrough with you and explain exactly when the floor is ready for everyday use.
About the owner
You Work Directly With the Owner
Jeff Bueler grew up on Whidbey Island, the fourth generation of contractors in his family. He’s also a licensed journeyman carpenter, which matters more on a flooring job than most people expect. Subfloor repair, stair work and trim are all carpentry.
Four Point Flooring is based in Bellevue and refinishes floors throughout Snohomish. Because Jeff also installs hardwood, he knows how floors are built, which helps when you’re deciding whether to refinish, repair or replace.
4th Generation Contractor
15+ Years Experience
Locally Owned & Operated
Licensed, Bonded & Insured
Projects
Recent Refinishing Projects




Local to Snohomish
Hardwood Refinishing From Downtown to the Valley
Most of our Snohomish refinishing is in the historic homes in and around downtown, where fir floors often turn up under carpet, linoleum or layers of paint. We also refinish in farmhouses in the Snohomish River valley and in newer homes around Three Lakes, Cathcart, Clearview and Machias.
Valley homes often have damp crawlspaces, and moisture affects how old floors behave after sanding. We check for it first, so the new finish isn’t applied over a floor that is still moving.
Get in Touch
Address
1130 140th Ave NE Ste. 300
Bellevue, WA 98005
Phone
License
Contractor License: FOURPPF763Q5 · Verify at L&I
Warranty
1-year workmanship warranty
Frequently asked questions
Snohomish Hardwood Refinishing FAQs
Can you refinish old fir floors?
Yes. Fir is softer than oak, so we sand it more carefully and recommend a durable finish. It will still dent more easily than oak, but many homeowners love the warmth and character.
Our floors were under carpet and linoleum. Can they be saved?
Often. Adhesive, paint and staple holes can usually be sanded out or filled. Badly damaged boards can be replaced with salvaged or matching wood. We’ll look before promising anything.
How do I know if my old floor is too thin to sand?
We check board thickness at a vent, threshold or loose board. If there’s too little wood above the tongue, we’ll tell you and suggest options.
Which finish suits a historic home?
Many owners of older homes prefer a satin finish with a slight amber tone, which suits old fir and oak. Clear water-based finishes keep the wood lighter. We’ll show you both.
How much does refinishing an older Snohomish home cost?
Older floors vary a lot, so we price after inspecting. Repairs, patching and nail work affect the total. The estimate is free.
Are you licensed and insured?
Four Point Flooring is licensed, bonded and insured in Washington (contractor license FOURPPF763Q5).
Service area
Hardwood Refinishing Near Snohomish
Based in Bellevue, we refinish hardwood floors in Snohomish and across the Eastside and Snohomish County for homeowners, landlords, builders and general contractors. Not on the list? Call and ask.
Floor too far gone to refinish? See hardwood floor installation in Snohomish.
Contact UsFree Estimates for Your Refinishing Project
Licensed hardwood refinisher serving Snohomish, 15+ years on Northwest homes and 5-star Google reviews. Tell us about your floors and we’ll set up a free on-site estimate.
- Four Point Flooring

