“Exceptional experience using Jeff/4point flooring to do a small repair and then restore of our 25+ year old wood floors t/o our home. He was always on time, respectful of our home and privacy and showed up with a smile and a laugh daily. Jeff did exactly what he said he would do for what we felt was a very fair price. Would use again and highly recommend”
★★★★★ Excellent · 5.0 on Google
Hardwood Floor Refinishing in Redmond, WA
Hardwood refinishing in Redmond usually starts with oak floors from the ’70s, ’80s or ’90s that are worn but still solid. Jeff Bueler, a licensed journeyman carpenter, sands them back to clean wood, fixes damaged boards and finishes them in a color that fits the house today.
Licensed, Bonded & Insured
15+ Years Experience
1-Year Workmanship Warranty
What we refinish
Redmond Hardwood Floor Refinishing
In Redmond, we see a lot of homes where the floors are the last thing that still looks dated. Honey-orange oak, worn finish in front of the sink and gray lanes down the hallway make a whole house feel older than it is. Refinishing changes that in days, not weeks, and without the cost of new material.
Many Redmond households also work from home, so we plan the job in sections where we can, tell you which rooms will be off-limits and for how long, and choose a finish with a cure time that fits your schedule.
Board Repair & Patching
Damaged boards are replaced before sanding, not after, so the new wood is sanded and finished with the rest and blends in.
Stairs & Landings
Stairs show wear first. We refinish treads, risers and landings to match the floors, and repair or replace damaged parts.
Full Sand & Refinish
Sanding removes the scratched, dulled top layer and the old finish in one go. Then the floor gets fresh protective coats in the sheen you choose.
Stain Color Changes
Sanded oak can take almost any look, from natural to deep brown. You approve stain samples on your own floor before we commit.
Testimonials
What Homeowners Say About Jeff
“Jeff is excellent at what he does! He rebuild my wood stairs to match the rest of the hardwood in my house. They came out exactly the same color as the rest of the wood! He’s an extremely talented carpenter and can do pretty much anything with wood down to the fine details! I would highly recommend him! And he’s reasonably priced! Thank you Jeff for doing such an amazing job!”
“We hired Jeff, at Four Point Flooring. He was there when he said he would be and finished when he said too. He is very knowledgeable about all the different woods & how to properly care for them. The results were beautifully refinished white oak floors. It was the first time they had been refinished in 34 years. It was a stressless transaction, fair price & excellent results. We highly recommend Jeff.”
“We hired Four Point Flooring for a hardwood floor installation in our Redmond home and had an excellent experience. Jeff was great to work with from start to finish, very knowledgeable, responsive, and easy to work with. They helped us select the right hardwood for our home, and the finished floors look fantastic. The project stayed on schedule and everything was left clean and polished. I would highly recommend Jeff and Four Point Flooring to anyone looking for quality hardwood installation.”
“I had a great experience working with Four Point Flooring. Jeff and the team handled my wood floor installation project in Bellevue with incredible attention to detail, and the final result looks flawless. Communication was excellent from start to finish. They kept me updated at every step, answered all my questions quickly, and made the whole process easy and stress free. If you're looking for high quality flooring services and a company that truly cares about customer experience, i highly recommend Four Point Flooring.”
“Four Point Flooring handled our hardwood installation at our home in Bellevue and the results exceeded expectations. Jeff and the team were organized, detail focused, and the new floors look flawless. Thank you!”
How it works
Our Hardwood Refinishing Process
A good refinish is mostly preparation and patience. Here’s how a typical Redmond refinishing job runs, from the first look at your floor to the day the furniture goes back. Jeff is your contact the whole way.
- 1
First Look
We look at the species, measure how much wood is left to sand, note any damage and identify the current finish before we price anything.
- 2
Get the Rooms Ready
Furniture comes out, openings are sealed off, and cabinets, baseboards and adjoining rooms are protected.
- 3
Sanding & Repairs
We sand in stages, hand-finish the edges and corners, cut in new boards where needed and set out stain samples for your approval.
- 4
Final Coats
The finish goes on in multiple coats. We do a final walkthrough with you and explain exactly when the floor is ready for everyday use.
About the owner
You Work Directly With the Owner
Jeff Bueler grew up on Whidbey Island, the fourth generation of contractors in his family. He’s also a licensed journeyman carpenter, which matters more on a flooring job than most people expect. Subfloor repair, stair work and trim are all carpentry.
Four Point Flooring is based in Bellevue and refinishes floors throughout Redmond. Because Jeff also installs hardwood, he knows how floors are built, which helps when you’re deciding whether to refinish, repair or replace.
4th Generation Contractor
15+ Years Experience
Locally Owned & Operated
Licensed, Bonded & Insured
Projects
Recent Refinishing Projects




Local to Redmond
Refinishing Hardwood Across Redmond
The older homes on Education Hill and in Grass Lawn and Idylwood often have solid oak that has been sanded once or twice already, so we check what’s left before starting. Newer homes on Redmond Ridge and toward Bear Creek often have engineered floors, where the sandable layer is thinner and the job has to be more careful.
We also refinish in Overlake, Downtown Redmond, the Willows and Rose Hill area and near Marymoor. Townhomes and condos usually come with HOA rules on noise and hours, and we schedule around them.
Get in Touch
Address
1130 140th Ave NE Ste. 300
Bellevue, WA 98005
Phone
License
Contractor License: FOURPPF763Q5 · Verify at L&I
Warranty
1-year workmanship warranty
Frequently asked questions
Redmond Hardwood Refinishing FAQs
How much does it cost to refinish hardwood floors in Redmond?
Price depends on the floor size, the wood’s condition, any color change, repairs and the finish you choose. We measure and inspect on site, then give you a free written estimate.
Can I keep working from home while you refinish?
Usually, yes. We can often do the floor in sections so you keep a usable room. Sanding is loud, and you’ll need to stay off fresh finish, so we’ll give you a clear room-by-room schedule up front.
How long does refinishing take?
Most whole-floor jobs take a few days of work, plus time for the finish to cure before furniture goes back. Stain changes and repairs add time. We’ll give you a schedule with the estimate.
Will a new stain match my kitchen cabinets?
We can’t promise an exact match to cabinets, but we can get close. We put stain samples on your floor next to the cabinets so you choose in real light.
Can you refinish floors that have been refinished before?
Usually. Solid oak can typically be sanded several times. We check the remaining thickness at a vent or threshold before starting.
Do you offer a warranty?
Four Point Flooring is licensed, bonded and insured in Washington (contractor license FOURPPF763Q5), and our work is backed by a 1-year workmanship warranty.
Service area
Hardwood Refinishing Near Redmond
Based in Bellevue, we refinish hardwood floors in Redmond and across the Eastside and Snohomish County for homeowners, landlords, builders and general contractors. Not on the list? Call and ask.
Floor too far gone to refinish? See hardwood floor installation in Redmond.
Contact UsFree Estimates for Your Refinishing Project
Licensed hardwood refinisher serving Redmond, 15+ years on Northwest homes and 5-star Google reviews. Tell us about your floors and we’ll set up a free on-site estimate.
- Four Point Flooring

