“We hired Jeff, at Four Point Flooring. He was there when he said he would be and finished when he said too. He is very knowledgeable about all the different woods & how to properly care for them. The results were beautifully refinished white oak floors. It was the first time they had been refinished in 34 years. It was a stressless transaction, fair price & excellent results. We highly recommend Jeff.”
★★★★★ Excellent · 5.0 on Google
Hardwood Floor Refinishing in Kirkland, WA
Hardwood floor refinishing in Kirkland is often the fastest way to update a home without tearing anything out. Jeff Bueler, a licensed journeyman carpenter, sands off years of wear, repairs damaged boards and puts down a fresh finish that fits how your household actually uses the floor.
Licensed, Bonded & Insured
15+ Years Experience
1-Year Workmanship Warranty
What we refinish
Kirkland Hardwood Refinishing Done Right the First Time
A lot of Kirkland homes have good hardwood that’s simply tired. Lake-view rooms with big windows fade unevenly, entryways turn gray from wet shoes, and dogs leave a pattern of scratches through the kitchen. All of that lives in the finish and the top fraction of the wood, and a proper sand and refinish removes it.
The difference between a good refinish and a bad one is mostly in the edges, the corners and the sanding sequence. Done carelessly, sanding leaves chatter marks and swirls that show up the moment light hits the floor. We sand in stages, hand-work the edges and check the floor under raking light before any finish goes down.
Stain Color Changes
Want lighter, darker or less orange? After sanding, we test stain samples right on your floor, so you see the real color before the whole floor gets done.
Board Repair & Patching
Black pet stains, water-swollen boards and splits near doorways get cut out and laced in with matching wood, then sanded flush with the rest of the floor.
Stairs & Landings
Worn treads and chipped nosings are refinished to match the floor, or rebuilt when they’re too far gone. Jeff’s carpentry license covers the work.
Full Sand & Refinish
When the finish has worn through and the wood itself is scratched or graying, a full sanding takes the floor back to fresh wood. New finish coats go on after that.
Testimonials
Reviews From Local Homeowners
“Exceptional experience using Jeff/4point flooring to do a small repair and then restore of our 25+ year old wood floors t/o our home. He was always on time, respectful of our home and privacy and showed up with a smile and a laugh daily. Jeff did exactly what he said he would do for what we felt was a very fair price. Would use again and highly recommend”
“Jeff is excellent at what he does! He rebuild my wood stairs to match the rest of the hardwood in my house. They came out exactly the same color as the rest of the wood! He’s an extremely talented carpenter and can do pretty much anything with wood down to the fine details! I would highly recommend him! And he’s reasonably priced! Thank you Jeff for doing such an amazing job!”
“We hired Four Point Flooring for a hardwood floor installation in our Redmond home and had an excellent experience. Jeff was great to work with from start to finish, very knowledgeable, responsive, and easy to work with. They helped us select the right hardwood for our home, and the finished floors look fantastic. The project stayed on schedule and everything was left clean and polished. I would highly recommend Jeff and Four Point Flooring to anyone looking for quality hardwood installation.”
“I had a great experience working with Four Point Flooring. Jeff and the team handled my wood floor installation project in Bellevue with incredible attention to detail, and the final result looks flawless. Communication was excellent from start to finish. They kept me updated at every step, answered all my questions quickly, and made the whole process easy and stress free. If you're looking for high quality flooring services and a company that truly cares about customer experience, i highly recommend Four Point Flooring.”
“Four Point Flooring handled our hardwood installation at our home in Bellevue and the results exceeded expectations. Jeff and the team were organized, detail focused, and the new floors look flawless. Thank you!”
How it works
Our Hardwood Refinishing Process
A good refinish is mostly preparation and patience. Here’s how a typical Kirkland refinishing job runs, from the first look at your floor to the day the furniture goes back. Jeff is your contact the whole way.
- 1
Assess the Floor
Species, remaining wood thickness, damage and the existing finish all get checked on the first visit, so the quote matches what your floor actually needs.
- 2
Protect the House
We move what needs moving, seal doorways and vents with plastic, and cover cabinets and trim so the rest of your home stays clean.
- 3
Sand, Fix & Sample
The floor is sanded in passes from coarse to fine grit, edges are done by hand, damaged boards are replaced, and stain samples go down for you to choose.
- 4
Coat & Hand Back
Finish coats go on in the system you picked. Then we walk the floor together and give you a timeline for walking, rugs and furniture.
About the owner
You Work Directly With the Owner
Jeff Bueler grew up on Whidbey Island, the fourth generation of contractors in his family. He’s also a licensed journeyman carpenter, which matters more on a flooring job than most people expect. Subfloor repair, stair work and trim are all carpentry.
Four Point Flooring is based in Bellevue and refinishes floors throughout Kirkland. Because Jeff also installs hardwood, he knows how floors are built, which helps when you’re deciding whether to refinish, repair or replace.
4th Generation Contractor
15+ Years Experience
Locally Owned & Operated
Licensed, Bonded & Insured
Projects
Recent Refinishing Projects




Local to Kirkland
Refinishing Hardwood in Every Kirkland Neighborhood
Kirkland’s mid-century homes in Rose Hill, Juanita and Kingsgate often have oak floors that haven’t been refinished in decades, and some have been sanded so many times that we check thickness carefully before starting. Newer homes in Houghton and Lakeview tend to have wide-plank and engineered floors, where the sandable layer is thinner and the sanding has to be more careful.
For condos around Moss Bay and Totem Lake, we work within HOA rules on noise, hours and elevator use. We also refinish in Finn Hill, Norkirk, Market, Highlands and Evergreen Hill.
Get in Touch
Address
1130 140th Ave NE Ste. 300
Bellevue, WA 98005
Phone
License
Contractor License: FOURPPF763Q5 · Verify at L&I
Warranty
1-year workmanship warranty
Frequently asked questions
Kirkland Hardwood Refinishing FAQs
What affects the price of hardwood refinishing in Kirkland?
Square footage, the wood’s condition, stain changes, repairs, stairs and the finish system. Wide-plank and engineered floors sometimes take more care to sand. We price it after seeing the floor, and the estimate is free.
Can engineered hardwood be refinished?
Often, yes, if the top layer of real wood is thick enough. Many engineered floors in newer Kirkland homes can take one or two sandings, and some can’t be sanded at all. We check the wear layer at a vent or threshold before recommending anything.
My floors faded near the windows. Will refinishing fix that?
Usually. Sun fading is mostly in the finish and the top of the wood, and sanding removes it. Afterward, we can talk about finishes and window treatments that slow fading down.
How do I keep dog scratches from coming back so fast?
No finish is scratch-proof, but a durable finish in a lower sheen hides scratches far better than high gloss. We’ll recommend a finish system based on your pets and traffic.
Do you refinish hardwood in Kirkland condos?
Yes. We’ll review your HOA’s rules on work hours, noise and elevator use, and schedule the sanding to fit them.
Are you licensed and insured?
Four Point Flooring is licensed, bonded and insured in Washington (contractor license FOURPPF763Q5), and we’ll walk the finished floor with you before we call the job done.
Service area
Hardwood Refinishing Near Kirkland
Based in Bellevue, we refinish hardwood floors in Kirkland and across the Eastside and Snohomish County for homeowners, landlords, builders and general contractors. Not on the list? Call and ask.
Floor too far gone to refinish? See hardwood floor installation in Kirkland.
Contact UsFree Estimates for Your Refinishing Project
Licensed hardwood refinisher serving Kirkland, 15+ years on Northwest homes and 5-star Google reviews. Tell us about your floors and we’ll set up a free on-site estimate.
- Four Point Flooring

